libcurl - client-side URL transfers
This is a short overview on how to use libcurl in your C programs. There are specific man pages for each function mentioned in here. There are also the libcurl-easy man page, the libcurl-multi man page, the libcurl-share man page and the libcurl-tutorial man page for in-depth understanding on how to program with libcurl.
There are many bindings available that bring libcurl access to your favourite language. Look elsewhere for documentation on those.
libcurl has a global constant environment that you must set up and maintain while using libcurl. This essentially means you call curl_global_init at the start of your program and curl_global_cleanup at the end. See GLOBAL CONSTANTS below for details.
To transfer files, you create an "easy handle" using curl_easy_init for a single individual transfer (in either direction). You then set your desired set of options in that handle with curl_easy_setopt. Options you set with curl_easy_setopt stick. They will be used on every repeated use of this handle until you either change the option, or you reset them all with curl_easy_reset.
To actually transfer data you have the option of using the "easy" interface, or the "multi" interface.
The easy interface is a synchronous interface with which you call curl_easy_perform and let it perform the transfer. When it is completed, the function returns and you can continue. More details are found in the libcurl-easy man page.
The multi interface on the other hand is an asynchronous interface, that you call and that performs only a little piece of the transfer on each invoke. It is perfect if you want to do things while the transfer is in progress, or similar. The multi interface allows you to select() on libcurl action, and even to easily download multiple files simultaneously using a single thread. See further details in the libcurl-multi man page.
You can have multiple easy handles share certain data, even if they are used in different threads. This magic is setup using the share interface, as described in the libcurl-share man page.
There is also a series of other helpful functions to use, including these:
gets detailed libcurl (and other used libraries) version info
converts a date string to time_t
get information about a performed transfer
helps building an HTTP form POST
free a list built with curl_formadd
builds a linked list
frees a whole curl_slist
On unix-like machines, there's a tool named curl-config that gets installed with the rest of the curl stuff when 'make install' is performed.
curl-config is added to make it easier for applications to link with libcurl and developers to learn about libcurl and how to use it.
Run 'curl-config --libs' to get the (additional) linker options you need to link with the particular version of libcurl you've installed. See the curl-config(1) man page for further details.
Unix-like operating system that ship libcurl as part of their distributions often don't provide the curl-config tool, but simply install the library and headers in the common path for this purpose.
Many Linux and similar systems use pkg-config to provide build and link options about libraries and libcurl supports that as well.
All public functions in the libcurl interface are prefixed with 'curl_' (with a lowercase c). You can find other functions in the library source code, but other prefixes indicate that the functions are private and may change without further notice in the next release.
Only use documented functions and functionality!
libcurl works exactly the same, on any of the platforms it compiles and builds on.
libcurl is thread safe but there are a few exceptions. Refer to libcurl-thread for more information.
Persistent connections means that libcurl can re-use the same connection for several transfers, if the conditions are right.
libcurl will always attempt to use persistent connections. Whenever you use curl_easy_perform or curl_multi_perform etc, libcurl will attempt to use an existing connection to do the transfer, and if none exists it'll open a new one that will be subject for re-use on a possible following call to curl_easy_perform or curl_multi_perform.
To allow libcurl to take full advantage of persistent connections, you should do as many of your file transfers as possible using the same handle.
If you use the easy interface, and you call curl_easy_cleanup, all the possibly open connections held by libcurl will be closed and forgotten.
When you've created a multi handle and are using the multi interface, the connection pool is instead kept in the multi handle so closing and creating new easy handles to do transfers will not affect them. Instead all added easy handles can take advantage of the single shared pool.
There are a variety of constants that libcurl uses, mainly through its internal use of other libraries, which are too complicated for the library loader to set up. Therefore, a program must call a library function after the program is loaded and running to finish setting up the library code. For example, when libcurl is built for SSL capability via the GNU TLS library, there is an elaborate tree inside that library that describes the SSL protocol.
curl_global_init is the function that you must call. This may allocate resources (e.g. the memory for the GNU TLS tree mentioned above), so the companion function curl_global_cleanup releases them.
The basic rule for constructing a program that uses libcurl is this: Call curl_global_init, with a CURL_GLOBAL_ALL argument, immediately after the program starts, while it is still only one thread and before it uses libcurl at all. Call curl_global_cleanup immediately before the program exits, when the program is again only one thread and after its last use of libcurl.
You can call both of these multiple times, as long as all calls meet these requirements and the number of calls to each is the same.
It isn't actually required that the functions be called at the beginning and end of the program -- that's just usually the easiest way to do it. It is required that the functions be called when no other thread in the program is running.
These global constant functions are not thread safe, so you must not call them when any other thread in the program is running. It isn't good enough that no other thread is using libcurl at the time, because these functions internally call similar functions of other libraries, and those functions are similarly thread-unsafe. You can't generally know what these libraries are, or whether other threads are using them.
The global constant situation merits special consideration when the code you are writing to use libcurl is not the main program, but rather a modular piece of a program, e.g. another library. As a module, your code doesn't know about other parts of the program -- it doesn't know whether they use libcurl or not. And its code doesn't necessarily run at the start and end of the whole program.
A module like this must have global constant functions of its own, just like curl_global_init and curl_global_cleanup. The module thus has control at the beginning and end of the program and has a place to call the libcurl functions. Note that if multiple modules in the program use libcurl, they all will separately call the libcurl functions, and that's OK because only the first curl_global_init and the last curl_global_cleanup in a program change anything. (libcurl uses a reference count in static memory).
In a C++ module, it is common to deal with the global constant situation by defining a special class that represents the global constant environment of the module. A program always has exactly one object of the class, in static storage. That way, the program automatically calls the constructor of the object as the program starts up and the destructor as it terminates. As the author of this libcurl-using module, you can make the constructor call curl_global_init and the destructor call curl_global_cleanup and satisfy libcurl's requirements without your user having to think about it. (Caveat: If you are initializing libcurl from a Windows DLL you should not initialize it from DllMain or a static initializer because Windows holds the loader lock during that time and it could cause a deadlock.)
curl_global_init has an argument that tells what particular parts of the global constant environment to set up. In order to successfully use any value except CURL_GLOBAL_ALL (which says to set up the whole thing), you must have specific knowledge of internal workings of libcurl and all other parts of the program of which it is part.
A special part of the global constant environment is the identity of the memory allocator. curl_global_init selects the system default memory allocator, but you can use curl_global_init_mem to supply one of your own. However, there is no way to use curl_global_init_mem in a modular program -- all modules in the program that might use libcurl would have to agree on one allocator.
There is a failsafe in libcurl that makes it usable in simple situations without you having to worry about the global constant environment at all: curl_easy_init sets up the environment itself if it hasn't been done yet. The resources it acquires to do so get released by the operating system automatically when the program exits.
This failsafe feature exists mainly for backward compatibility because there was a time when the global functions didn't exist. Because it is sufficient only in the simplest of programs, it is not recommended for any program to rely on it.
This HTML page was made with roffit.